自動化包裝生產線機械設備常用的零部件有哪些？
發布時間：
2023-02-10 11:26
自動化包裝生產線是針對企業用戶在生產過程控制中的各種復雜控制要求，采用DCS和PLC等控制系統為企業量身定制，技術先進、可靠性高、經濟實用的電氣和自動化控制，生產，輸送，包裝、清洗系統等，其中常用的零部件主要有：
The automatic packaging production line is a kind of electrical and automatic control system with advanced technology, high reliability, economic and practical, production, transportation, packaging, cleaning system, etc., which is customized for the enterprise by using DCS, PLC and other control systems
指示燈：一般大多都是發光二極管，壽命長，氖泡和燈泡等壽命短，工作電壓有交流電和直流電。
Indicator light: generally, most of them are light-emitting diodes, with long service life, neon bubble and bulb, etc., with short service life, AC and DC working voltage.
按鈕就和急停開關：按鈕常用于氣動，暫定等控制鍵，還有些旋轉類的按鈕控制；急停按鈕一般都是紅色和黃色。
Button and emergency stop switch: buttons are usually used for pneumatic, temporary and other control keys, and some rotary buttons are used for control; emergency stop buttons are generally red and yellow.
熔斷器：主要是保護電路，當電壓和電流過大時，能夠熔斷保護電路。
Fuse: mainly protection circuit, when the voltage and current is too large, it can fuse the protection circuit.
轉換開關和電源開關：控制按鍵。
Transfer switch and power switch: control key.
斷路器：主要是恢復短路保護的，當電路和電器裝置發生瞬間短路和瞬間大電流時，自動跳閘，保護后路的裝置。
Circuit breaker: it is mainly used to restore short-circuit protection. When the circuit and electrical device have instantaneous short circuit and instantaneous high current, it will trip automatically and protect the back circuit.
交流接觸器：主要用來控制主電路的設備的通斷電的，一般電流較大.用觸點來控制接通電源。
AC contactor: mainly used to control the main circuit of the equipment on and off, the general current is larger. Use contact to control the power supply.
中間繼電器：和交流接觸器的一樣都是起保護電路的作用。
Intermediate relay: the same as the AC contactor is used to protect the circuit.
熱繼電器：是熱感元件，主要用于設備溫度過高的保護，自動短路保護后面的線路。
Thermal relay: it is a thermal element, which is mainly used for the protection of over high temperature and automatic short circuit protection of the circuit behind.
延時保護 器：一般分通電延時和斷電延遲。
Time delay protector: generally divided into power on delay and power off delay.
刀開關：主要起人工斷電控和控制，一般有2刀和三刀之分。
Knife switch: it is mainly controlled and controlled by manual breaking. It can be divided into 2 knives and 3 knives.
漏電開關：主要用于保護人身安全，有單相和三相漏電開關之分。
Leakage switch: mainly used to protect personal safety, there are single-phase and three-phase leakage switch.
每個零部件的采購都必須選擇進行嚴格的篩選，只有保證零部件功能的穩定才能保證自動化包裝生產線設備的正常運作。
The purchase of each part must be selected for strict screening. Only by ensuring the stability of the parts function can the normal operation of the automatic packaging production line equipment be ensured.
自動化包裝生產線