3C電子行業外觀缺陷檢測方案-機器視覺
發布時間：
2023-02-10 11:24
機器視覺檢測在3C電子行業運用非常廣泛，主要有表面缺陷檢測、尺寸測量檢測、鐳雕字符檢測、可變信息檢測（一維碼/二維碼/字符）、配合機械手貼合定位等等。
Machine vision detection is widely used in 3C electronics industry, mainly including surface defect detection, size measurement detection, radium carving character detection, variable information detection (one-dimensional code / two-dimensional code / character), fitting and positioning with manipulator, etc.
檢測功能：
Detection function:
表面外觀缺陷檢測：PCB板/柔性線路板/電容電器/手機外殼等等絲印缺陷檢測，印刷缺陷檢測，噴印外觀缺陷檢測，鐳雕外觀缺陷檢測等等。
Surface appearance defect detection: screen printing defect detection of PCB / flexible circuit board / capacitor / mobile phone shell, printing defect detection, spray printing appearance defect detection, radium carving appearance defect detection, etc.
尺寸測量檢測：電子芯片尺寸測量，PIN針高低及間距尺寸測量，電子輔件尺寸測量等等。
Dimension measurement and detection: electronic chip dimension measurement, pin pin pin height and spacing dimension measurement, electronic accessories dimension measurement, etc.
鐳雕及噴印信息檢測：可變一維碼信息檢測，可變二維碼信息檢測，生產日期缺失檢測，生產批號缺失檢測等等。
Radium engraving and printing information detection: variable one-dimensional code information detection, variable two-dimensional code information detection, production date missing detection, production batch number missing detection, etc.
貼合定位：配合機械手臂，機器視覺提取定位信息。
Fitting and positioning: cooperate with the manipulator to extract the positioning information by machine vision.
檢測速度
Detection speed
速度不低于20000pcs/小時（檢測不同的產品速度不同）
The speed shall not be less than 20000 PCS / h (different products are tested at different speeds)
不良處理
Bad treatment
聲光報警/停機/打標/發出剔廢信號等
Audible and visual alarm / shutdown / marking / waste removal signal, etc
設備優勢
Equipment advantages
軟件操作簡單，快速建模，向導設置，直觀的用戶界面
The software has the advantages of simple operation, fast modeling, wizard setting and intuitive user interface
檢測精度高，可針對不同區域設置不同的精度等級
The detection accuracy is high, and different accuracy levels can be set for different areas
檢測誤報率低
Low detection false positive rate
速度不低于20000pcs/小時（檢測不同的產品速度不同）
The speed shall not be less than 20000 PCS / h (different products are tested at different speeds)
不良存檔，檢測到的缺陷及不良圖片存檔到制定文件夾，可供操作人員針對不良追溯。
The defects are archived, and the detected defects and defective pictures are archived to the designated folder for the operator to trace the defects.
如果您正在為產品合格率而發愁，人工檢測達不到指定的標準，歡迎您致電咨詢我們山東紅寶自動化有限公司，我們會根據您所生產的產品特點，定制一套合適的機器視覺檢測系統，實現產品零缺陷。
If you are worried about the product qualification rate and the manual detection can not meet the specified standards, you are welcome to call Shandong Hongbao Automation Co., Ltd. we will customize a set of appropriate machine vision detection system according to the characteristics of your products to achieve zero defect.
機器視覺