機器視覺檢測系統在自動化包裝行業的檢測范圍
發布時間：
2023-02-10 11:30
在自動化包裝過程中，人眼無法持續對大批量生產的產品進行檢測，機器視覺檢測系統恰好能夠解決這一難題。視覺檢測技術的優勢在于一些微小尺寸的精確快速測量，形狀匹配，顏色辨識等，可以高效地完成對產品的包裝檢測，正確讀取產品的包裝信息，對產品質量嚴格把關。
In the process of automatic packaging, human eyes can not continuously detect the mass-produced products, and the machine vision inspection system can just solve this problem. The advantages of visual inspection technology lie in the accurate and rapid measurement of some small size, shape matching, color identification, etc., which can effectively complete the product packaging inspection, correctly read the product packaging information, and strictly control the product quality.
機器視覺檢測在制藥包裝行業的應用
Application of machine vision inspection in pharmaceutical packaging industry
?生產流程控制：如藥粒泡罩檢測，剔除破損的藥粒，正常通過正確的藥粒，保證所有泡罩內的藥粒都是完好無損；
Production process control: for example, the damaged particles are removed and the correct particles are passed normally to ensure that all the particles in the bubble cap are intact;
?質量控制：如藥瓶完成灌裝后，測量灌裝是否達到基準線；
Quality control: for example, after the completion of filling, measure whether the filling reaches the baseline;
?字符、條碼和二維碼識別：讀取條形碼、二維矩陣碼或打印字符，并驗證標簽內容和正確的方位；
Identification of characters, bar codes and two-dimensional codes: read bar codes, two-dimensional matrix codes or printed characters, and verify label contents and correct orientation;
?生產控制：檢查每個藥盒里的說明書是否遺漏或者總生產藥品的數量；
Production control: check whether the instructions in each kit are missing or the total quantity of drugs produced;
制藥包裝行業的要求非常高，必須達到指定的標準才能夠生產上市，視覺檢測系統無疑給醫藥行業帶來了驚喜，不但能夠保證藥品質量，及時剔除不合格產品，以確保高質量產品并符合相關法規。
The requirements of pharmaceutical packaging industry are very high, it must meet the specified standards before it can be produced and marketed. The visual inspection system undoubtedly brings a surprise to the pharmaceutical industry. It can not only ensure the quality of drugs, but also eliminate unqualified products in time, so as to ensure high-quality products and comply with relevant laws and regulations.
機器視覺系統在食品/啤酒/飲料行業的應用
Application of machine vision system in food、beer、beverage industry
?盒裝食品外包裝檢測：對盒裝食品的外包裝進行檢測（包括外包裝破損、標簽有無、生產日期有無等檢測）；
Detection of the outer package of boxed food: to detect the outer package of the boxed food (including the detection of the damage of the outer package, the existence of the label, the existence of the production date, etc.);
?透明瓶裝飲料的液位及瓶蓋缺損檢測：對透明瓶裝飲料的液位進行檢測，保障飲料灌裝的一致性；
Detection of liquid level and bottle cap defect of transparent bottled beverage: detect the liquid level of transparent bottled beverage to ensure the consistency of beverage filling;
?對瓶蓋包裝進行檢測，剔除漏裝瓶蓋、瓶蓋歪斜等不良品；
Detect the bottle cap packaging and eliminate the defective products such as missing bottle cap and bottle cap skew;
?易拉罐包裝飲料、罐頭食品等外形檢測：對易拉罐包裝飲料、罐頭食品等的拉環質量、生產日期有無、序列號等進行檢測；
Appearance inspection of pop-up beverage and canned food: inspect the quality, production date and serial number of pop-up can packaged beverage and canned food;
?紙盒飲料外包裝檢測：對紙盒飲料的外包裝如吸管有無、插孔是否破損等進行檢測；
Detection of carton beverage outer packaging: to detect the outer packaging of carton beverage, such as whether the straw is present or not, and whether the jack is damaged;
?整體包裝計數：對瓶裝、盒裝飲料等的整體包裝進行計數，保證包裝數量等等。
Overall packaging counting: counting the overall packaging of bottled and boxed drinks to ensure the number of packages, etc.
綜合以上行業分析可以看出，機器視覺檢測系統的檢測內容主要分為外外包裝標簽及三期，如生產批號、生產日期、保質期的檢測，以及產品外包裝箱上條形碼的檢測，和準確識別條形碼或字符印刷的對錯和完整度。
From the above industry analysis, it can be seen that the detection contents of machine vision inspection system are mainly divided into outer packaging label and three phases, such as the detection of production batch number, production date and shelf life, as well as the detection of barcode on the outer packing box, and the accurate identification of the correctness and integrity of barcode or character printing.
機器視覺檢測系統的突出貢獻就是幫助企業在大批量生產加工的過程中對零件裝配完整性，裝配尺寸精度，零件加工精度，位置、角度測量，零件識別，特性、字符識別等進行實時的監控與檢測。
The outstanding contribution of machine vision inspection is to help enterprises in the process of mass production and processing of parts assembly integrity, assembly dimension accuracy, parts processing accuracy, position, angle measurement, part identification, characteristics, character recognition and other real-time monitoring and testing.
視覺檢測系統,自動化包裝